Photochromic derivatives of indigo: historical overview of development, challenges and applications

• Gökhan Kaplan,
• Zeynel Seferoğlu and
• Daria V. Berdnikova

Beilstein J. Org. Chem. 2024, 20, 228–242, doi:10.3762/bjoc.20.23

• tinctoria plant. Like indirubins, the isoindigo derivatives were initially studied as potential therapeutics with pronounced antitumor activity [74]. More recently, advantageous charateristics of isoindigos for the applications in organic photovoltaics (OPV) [75] and optoelectronics [76] were revealed. The

Multi-redox indenofluorene chromophores incorporating dithiafulvene donor and ene/enediyne acceptor units

• Christina Schøttler,
• Kasper Lund-Rasmussen,
• Line Broløs,
• Philip Vinterberg,
• Ema Bazikova,
• Viktor B. R. Pedersen and
• Mogens Brøndsted Nielsen

Beilstein J. Org. Chem. 2024, 20, 59–73, doi:10.3762/bjoc.20.8

• Sciences, Beijing, China 10.3762/bjoc.20.8 Abstract Large donor–acceptor scaffolds derived from polycyclic aromatic hydrocarbons (PAHs) with tunable HOMO and LUMO energies are important for several applications, such as organic photovoltaics. Here, we present a large selection of PAHs based on central

Charge carrier transport in perylene-based and pyrene-based columnar liquid crystals

• Alessandro L. Alves,
• Simone V. Bernardino,
• Carlos H. Stadtlober,
• Edivandro Girotto,
• Giliandro Farias,
• Rodney M. do Nascimento,
• Sergio F. Curcio,
• Thiago Cazati,
• Marta E. R. Dotto,
• Juliana Eccher,
• Leonardo N. Furini,
• Hugo Gallardo,
• Harald Bock and
• Ivan H. Bechtold

Beilstein J. Org. Chem. 2023, 19, 1755–1765, doi:10.3762/bjoc.19.128

• ; columnar liquid crystal; organic electronics; perylene; pyrene; Introduction Conjugated organic molecules have been widely investigated due to their interesting transport properties and promising applications as active layer in organic photovoltaics (OPVs), organic field effect transistors (OFETs

A series of perylene diimide cathode interlayer materials for green solvent processing in conventional organic photovoltaics

• Kathryn M. Wolfe,
• Shahidul Alam,
• Eva German,
• Fahad N. Alduayji,
• Maryam Alqurashi,
• Frédéric Laquai and
• Gregory C. Welch

Beilstein J. Org. Chem. 2023, 19, 1620–1629, doi:10.3762/bjoc.19.119

• ethyl acetate, while using a bulk heterojunction (BHJ) comprised of PM6:Y6. High power conversion efficiencies (PCEs) of 13% were achieved compared to control devices using the standard PFN-Br CIL. Keywords: cathode interlayer materials; green solvent processing; organic photovoltaics; Introduction

Post-synthesis from Lewis acid–base interaction: an alternative way to generate light and harvest triplet excitons

• Hengjia Liu and
• Guohua Xie

Beilstein J. Org. Chem. 2022, 18, 825–836, doi:10.3762/bjoc.18.83

• ][32], e.g., organic thin-film transistors [45][46], organic photovoltaics [47], and chemical sensing [48]. Chemical structures of Lewis acid examples. Chemical structures of Lewis basic fluorescent polymer poly{2,5-pyridylene-co-1,4-[2,5-bis(2-ethylhexyloxy)]phenylene} 1 and D–A–D compound 2,5-bis((N

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• may be due to the low hole conductivity, a decrease in the HOMO level of the polymer, and a narrower band gap of visible light absorption [51]. Within the framework of the study of the prospects for polymer derivatives of isoindigo in organic photovoltaics and avoiding the use of the fullerene

• 1.94%) [39] or to their significant improvement (structure 27, efficiency 8.36%), respectively [40]. As it was found, the OSC based on polymer 27 showed one of the best values among the described structures of VOC 1.06 V. Others types of polymer structures that have good potential in organic

• photovoltaics can be found in the form of derivatives 28 and 29, containing two differently substituted isoindigo fragments connected through a thienylene spacer (Scheme 16). Bini et al. described the synthesis of polymer series 28a–e with different ratios of isoindigo fragments, one of which is capable of

Design, synthesis and photophysical properties of novel star-shaped truxene-based heterocycles utilizing ring-closing metathesis, Clauson–Kaas, Van Leusen and Ullmann-type reactions as key tools

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2021, 17, 1374–1384, doi:10.3762/bjoc.17.96

• applications ranging from organic thin‐film transistors (OTFTs), organic light-emitting diodes (OLEDs), dye‐sensitized solar cells (DSSCs), fluorescent probes, organic photovoltaics (OPVs) to the high hole mobility semiconductors, blue light-emitting materials, nonlinear optical materials and so forth [5][6][7

Synthesis of 6,13-difluoropentacene

• Matthias W. Tripp and
• Ulrich Koert

Beilstein J. Org. Chem. 2020, 16, 2136–2140, doi:10.3762/bjoc.16.181

• expanded π-systems and low HOMO–LUMO gaps with applications in different molecular-based organic electronics like OFETs, OLEDs or organic photovoltaics [1][2][3]. An advantage of organic molecular electronics over inorganic alternatives is the versatility in design of new molecular materials by

Synthesis of novel multifunctional carbazole-based molecules and their thermal, electrochemical and optical properties

• Nuray Altinolcek,
• Ahmet Battal,
• Mustafa Tavasli,
• William J. Peveler,
• Holly A. Yu and
• Peter J. Skabara

Beilstein J. Org. Chem. 2020, 16, 1066–1074, doi:10.3762/bjoc.16.93

• , respectively. Keywords: carbazole; electrochemistry; fluorescence; formyl group; solvatochromism; Introduction Carbazole derivatives have found many different applications in a variety of technologically important areas, such as organic light emitting diodes (OLEDs), organic photovoltaics (OPVs), dye

Synthesis of dipolar molecular rotors as linkers for metal-organic frameworks

• Sebastian Hamer,
• Fynn Röhricht,
• Marius Jakoby,
• Ian A. Howard,
• Xianghui Zhang,
• Christian Näther and
• Rainer Herges

Beilstein J. Org. Chem. 2019, 15, 1331–1338, doi:10.3762/bjoc.15.132

• acid 1 using cesium fluoride under a carbon dioxide atmosphere. Difluoro- and dicyanobenzothiadiazole compounds 2 and 3 Substituted benzothiadiazole derivatives are well studied in the literature and are of great interest in organic photovoltaics and electronics. As there are no reports of such

Design and synthesis of C₃-symmetric molecules bearing propellane moieties via cyclotrimerization and a ring-closing metathesis sequence

• Sambasivarao Kotha,
• Saidulu Todeti and
• Vikas R. Aswar

Beilstein J. Org. Chem. 2018, 14, 2537–2544, doi:10.3762/bjoc.14.230

• -symmetric molecules [19][20][21][22][23][24][25][26][27][28][29][30], here, we conceived new strategies to N-containing star-shaped molecules. Such star-shaped molecules are generally used in organic light-emitting diodes (OLEDs) [31][32][33], organic photovoltaics (OPVs) [34], organic field-effect

Synergistic electrodeposition of bilayer films and analysis by Raman spectroscopy

• Saadeldin E. T. Elmasly,
• Luca Guerrini,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Neil J. Findlay,
• Karen Faulds and
• Peter J. Skabara

Beilstein J. Org. Chem. 2018, 14, 2186–2189, doi:10.3762/bjoc.14.191

• bilayer to be subjected to solution-processing. It is therefore possible to deposit any layer onto the neutral insoluble polymer (e.g., an acceptor material for organic photovoltaics or an electron transport material for OLEDs) illustrating the potential for electrochemically deposited bilayers to be used

Recent advances on organic blue thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs)

• Thanh-Tuân Bui,
• Fabrice Goubard,
• Malika Ibrahim-Ouali,
• Didier Gigmes and
• Frédéric Dumur

Beilstein J. Org. Chem. 2018, 14, 282–308, doi:10.3762/bjoc.14.18

Nitration of 5,11-dihydroindolo[3,2-b]carbazoles and synthetic applications of their nitro-substituted derivatives

• Roman A. Irgashev,
• Nikita A. Kazin,
• Gennady L. Rusinov and
• Valery N. Charushin

Beilstein J. Org. Chem. 2017, 13, 1396–1406, doi:10.3762/bjoc.13.136

• (OFETs) [14][15][16][17][18], and a variety of organic photovoltaics [19][20][21][22][23][24][25]. For instance, two functional ICZ-cored compounds, that have recently been described as effective materials for organic electronic devices, are shown in Figure 1. It should be noted that the indolo[3,2-b

Molecular-level architectural design using benzothiadiazole-based polymers for photovoltaic applications

• Vinila N. Viswanathan,
• Arun D. Rao,
• Upendra K. Pandey,
• Arul Varman Kesavan and
• Praveen C. Ramamurthy

Beilstein J. Org. Chem. 2017, 13, 863–873, doi:10.3762/bjoc.13.87

• backbone was also studied. This enhanced planarity led to the highest observed mobility among the reported three polymers as well as to an improvement in the device efficiency by more than 40% for P3. Keywords: bulk heterojunction; donor–acceptor–donor polymer; low band gap polymer; organic photovoltaics

Comparing blends and blocks: Synthesis of partially fluorinated diblock polythiophene copolymers to investigate the thermal stability of optical and morphological properties

• Pierre Boufflet,
• Sebastian Wood,
• Jessica Wade,
• Zhuping Fei,
• Ji-Seon Kim and
• Martin Heeney

Beilstein J. Org. Chem. 2016, 12, 2150–2163, doi:10.3762/bjoc.12.205

• -scale is of particular interest in the field of organic photovoltaics (OPV), where separation of the electron donor and acceptor domains on the order of the exciton diffusion length (5–10 nm) is required [1][6][7][8][9]. Many approaches have been reported to tether two or more light-absorbing polymers

Thiophene-forming one-pot synthesis of three thienyl-bridged oligophenothiazines and their electronic properties

• Dominik Urselmann,
• Konstantin Deilhof,
• Bernhard Mayer and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2016, 12, 2055–2064, doi:10.3762/bjoc.12.194

• hole-transport materials in organic light emitting diodes [10][11][12][13][14][15], organic field-effect transistors [16][17][18][19][20][21][22], and organic photovoltaics [23][24][25][26]. Likewise their smaller congeners, 2,5-di(hetero)aryl substituted thiophenes [4][5], are equally relevant as

Synthesis and characterization of fluorinated azadipyrromethene complexes as acceptors for organic photovoltaics

• Forrest S. Etheridge,
• Roshan J. Fernando,
• Sandra Pejić,
• Matthias Zeller and
• Geneviève Sauvé

Beilstein J. Org. Chem. 2016, 12, 1925–1938, doi:10.3762/bjoc.12.182

• Homoleptic zinc(II) complexes of di(phenylacetylene)azadipyrromethene (e.g., Zn(WS3)2) are potential non-fullerene electron acceptors for organic photovoltaics. To tune their properties, fluorination of Zn(WS3)2 at various positions was investigated. Three fluorinated azadipyrromethene-based ligands were

• chelation [1][2][3][4]. BF2+-chelated ADP derivatives (Figure 1b) in particular have drawn interest for photodynamic therapy, bio-imaging and light harvesting applications [5][6][7][8]. We have shown that derivatives of Zn(ADP)2 are promising electron acceptors for organic photovoltaics (OPVs) [9][10]. A

3,6-Carbazole vs 2,7-carbazole: A comparative study of hole-transporting polymeric materials for inorganic–organic hybrid perovskite solar cells

• Wei Li,
• Munechika Otsuka,
• Takehito Kato,
• Yang Wang,
• Takehiko Mori and
• Tsuyoshi Michinobu

Beilstein J. Org. Chem. 2016, 12, 1401–1409, doi:10.3762/bjoc.12.134

• the PCE of 4% [1], some key improvements have been made in designing device structures and fabrication methods, and the PCE of the PSCs rapidly increased to >20% [2][3][4][5]. Compared to the conventional organic photovoltaics and dye-sensitized solar cells (DSSCs), PSCs benefit from a broad light

Syntheses of dibenzo[d,d']benzo[2,1-b:3,4-b']difuran derivatives and their application to organic field-effect transistors

• Minh Anh Truong and
• Koji Nakano

Beilstein J. Org. Chem. 2016, 12, 805–812, doi:10.3762/bjoc.12.79

• conventional silicon-based semiconductors. Organic semiconducting materials can be used as active layers in organic field-effect transistors (OFETs) [1][2][3][4][5][6][7], organic light-emitting diodes (OLEDs) [8][9][10], and organic photovoltaics (OPVs) [11][12]. Among many organic semiconducting materials so

Tuning the size of a redox-active tetrathiafulvalene-based self-assembled ring

• Sébastien Bivaud,
• Sébastien Goeb,
• Vincent Croué,
• Magali Allain,
• Flavia Pop and
• Marc Sallé

Beilstein J. Org. Chem. 2015, 11, 966–971, doi:10.3762/bjoc.11.108

• its size, and illustrating the high potential of the coordination-driven approach in tuning the size and the shape of a target cavity. This approach constitutes a promising strategy to address the design of organic materials (e.g. for organic photovoltaics or molecular electronic devices). Indeed

Functionalized branched EDOT-terthiophene copolymer films by electropolymerization and post-polymerization “click”-reactions

• Miriam Goll,
• Adrian Ruff,
• Erna Muks,
• Felix Goerigk,
• Beatrice Omiecienski,
• Ines Ruff,
• Rafael C. González-Cano,
• Juan T. Lopez Navarrete,
• M. Carmen Ruiz Delgado and
• Sabine Ludwigs

Beilstein J. Org. Chem. 2015, 11, 335–347, doi:10.3762/bjoc.11.39

• , especially the position of the HOMO level and the HOMO–LUMO band gap value are crucial for the applicability in different devices such as organic photovoltaics, organic field effect transistors, organic light emitting diodes or organic electrochromic windows [1][2][3][4][5][6]. There are different ways to

• . Such an orthogonal functionalization may further be used to control the properties in new materials for organic photovoltaics where low oxidation potentials are needed (monomer ratio) and a good processability from environmental solvents (e.g., water) is desired (introduction of polar/ionic groups

Solution processable diketopyrrolopyrrole (DPP) cored small molecules with BODIPY end groups as novel donors for organic solar cells

• Diego Cortizo-Lacalle,
• Calvyn T. Howells,
• Upendra K. Pandey,
• Joseph Cameron,
• Neil J. Findlay,
• Anto Regis Inigo,
• Tell Tuttle,
• Peter J. Skabara and
• Ifor D. W. Samuel

Beilstein J. Org. Chem. 2014, 10, 2683–2695, doi:10.3762/bjoc.10.283

• interpenetrating network they form within a bulk heterojunction (BHJ), has led to intense research directed towards the synthesis of conjugated polymers for bulk heterojunction organic photovoltaics (OPVs) [1][2][3]. In these devices, the conjugated polymer acts as an electron donor and a soluble fullerene, most

• . Conclusion Undoubtedly, the importance of having highly absorptive cores in the organic compounds is essential in order to increase the light harvesting for organic photovoltaics. However, other parameters such as good alignment of HOMO–LUMO levels with the acceptor material is also vital for efficient

Scalable synthesis of 5,11-diethynylated indeno[1,2-b]fluorene-6,12-diones and exploration of their solid state packing

• Bradley D. Rose,
• Peter J. Santa Maria,
• Aaron G. Fix,
• Chris L. Vonnegut,
• Lev N. Zakharov,
• Sean R. Parkin and
• Michael M. Haley

Beilstein J. Org. Chem. 2014, 10, 2122–2130, doi:10.3762/bjoc.10.219

• heteroatoms, etc.) [1][2][3]. Recently there has been resurging interest in PCHs for use as active materials in organic electronic devices. Some popular examples of devices undergoing extensive exploration are organic field effect transistors (OFET) [4][5], organic photovoltaics (OPV) [6], and organic light

Novel indolin-2-one-substituted methanofullerenes bearing long n-alkyl chains: synthesis and application in bulk-heterojunction solar cells

• Irina P. Romanova,
• Andrei V. Bogdanov,
• Inessa A. Izdelieva,
• Vasily A. Trukhanov,
• Gulnara R. Shaikhutdinova,
• Dmitry G. Yakhvarov,
• Shamil K. Latypov,
• Vladimir F. Mironov,
• Vladimir A. Dyakov,
• Ilya V. Golovnin,
• Dmitry Yu. Paraschuk and
• Oleg G. Sinyashin

Beilstein J. Org. Chem. 2014, 10, 1121–1128, doi:10.3762/bjoc.10.111

• crystalline domains. Moreover, the more soluble AIMs do not show a better miscibility with the P3HT crystalline phase. Keywords: bulk heterojunction; fullerenes; isatin; phosphorus; photovoltaics; Introduction Organic photovoltaics are a rapidly growing field of research due to its potential for production